Payment & Shipping Terms:
|Running Method:||Fully Automatic||Current Density:||≦10000mA/M2|
|Available Chlorine Production:||1 Kg / H||Material Of Electrode:||Pure Titanium|
|Concentration Of Fluoride Ion:||<50mg/L||PH Range:||1-14|
dsa titanium anode,
mixed metal oxide electrode
Full Automatic Titanium Electrode Products for Chlorination Equipment with CE Certificate
Introduction of electrodes
Electrodes (Anodes & Cathodes) consist of a basic component, which is responsible for mechanical stability and uniform current distribution. As Titanium has all these character, insoluble electrodes are manufactured with titanium as basic component. Occasionally electrodes are also made from Nb, Ta and or Zr. In general, electrodes are available in the form of plate, mesh, rod, wire, ribbon, and customs built. Electro catalytically selective Electrodes from Titanium are superior to conventional Nickel, Lead, Lead alloy, Steel, Graphite & Magnetite Electrodes.
1, Titanium anode long life, diaphragm production of chlor-alkali industry, the metal anode resistance to chlorine and alkali corrosion, anode life has been more than 6 years, while the graphite anode only 8 months.
2, can increase the current density. Diaphragm production of chlor-alkali, the graphite anode current density of 8A / dm2, titanium anode can be doubled to increase, up to 17A / dm2, so in the electrolysis plant, electrolyzer under the same conditions, the output can be increased by 1 times, Single tank production capacity, effectively improve the labor productivity. In the high operating current density for electrolysis, the use of titanium anode is more appropriate.
3, the use of DSA, mercury and diaphragm method of salt electrolytic cell design concepts and operating conditions can be improved, energy consumption can be reduced. DSA low over-potential characteristics, the electrode between the surface and the electrode bubble is easy to exclude, is the metal anode electrolytic cell voltage reduction of the important reasons.
4, corrosion resistance, and can be in many corrosive, with special requirements of the electrolytic medium work.
1. Water ionizer or water electrolysis
*Making alkaline and acidic water
2. Waste water treatment
*Organic sewage treatment,
*Chemical sewage treatment,
*Pesticide sewage treatment,
*Drinking water disinfection,
*Bleaching & dyeing,
*Domestic sewage treatment,
*Hospital sewage treatment,
*Food industry disinfection etc.
3. Sodium Hypochlorite Generator & Chlorinator
*Swimming pool water treatment
*Water sterilization & water purification,
4. Sea water electrolysis or Electrodialysis
*Material recycling in the waste water,
*Chemical, medical industry,
*Making fresh water, etc.
5. Chlor-Alkali Industry
7. Battery Producing
8. Cathodic Protection
|Working life||≥5 years|
|Technology||Punching ,Pulling, Brush painting|
|Shape||Tube, sheet, mesh sheet|
|Main Working Parameters||I. Current density<2000A/M2.
III. PH 1~14.
IV. Max content of Fluoride ion is 50mg/L
|Applications||Sodium Hypochlorite Generator, swimming pool disinfection, etc.|
|Payment terms||T/T, L/C, Western Union, PayPal or as your requirements|
Contact Person: wu